Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service levels, popularity trends, and more. The rankings reflect our opinion and should be a good starting point for shopping. By purchasing the products we rank, you’ll get the lowest price we found while we may receive a commission at no cost to you, which will help us continue to provide you with value.
【Stable Transmission & Plug and Play】The lan splitter is equipped with a 5V1A power port, powered by a USB cable, ensuring more stable signal transmission. It is plug and play, eliminating the need for additional software or driver installation. Simply plug in the Ethernet cable to achieve the convenience of splitting one network into three. (Note: For stable network transmission, it is essential to connect the external power supply when in use).
【Ethernet Splitter 1 to 3】This ethernet splitter solves the problem of insufficient network interfaces, allowing multiple devices to share a single Ethernet connection. It supports three computers or other devices to access the internet simultaneously through one Ethernet cable. It comes with a USB cable for power supply, making it simple, efficient, and plug-and-play. Note: To ensure stable work, please connect the external power supply when in use.
【1000Mbps High Speed Transmission】With a high transmission rate of 1000Mbps and compatibility with Cat6/7/8 cables, this internet splitter ensures fast and stable data transfer. Whether you are transferring files, streaming videos, or playing online games, it provides an efficient network experience. Note: Three computers can only share 1000M network bandwidth, and when connected to a single computer, it supports up to 1000M.
Plug and Play: The LAN Splitter comes with a USB-C charging port and 1M USB A to USB-C charging cable, only power is required to plug in, and no additional software or drivers to install. Even within a distance of 100 meters, you can connect the Ethernet Extender to your RJ45 devices to enjoy the convenience and happiness of a stable connection.
Gigabit Ethernet Splitter: The Network Splitter divides a network connection into two network outputs with 1000Mbps at the same time, and there is no crosstalk between the signaling of the two cable sets. In addition, the LED light design makes the working status more intuitive and the fault status is easy to troubleshoot.
Ethernet Splitter 1 to 2: This Gigabit Ethernet Splitter is designed to provide an efficient network expansion solution. It solves the problem of insufficient network ports and unstable signal transmission, avoids frequent plugging and unplugging, and prolongs the life of the product.
Curious about how we select the top products for you? Explore How It Works
How do we rank
Our AI-powered platform ranks products using multiple weighted factors from millions of products and user reviews across the web, providing the most valuable and real data. Higher scores rank first.
【Plug & Play】USB cable powered, only 5v1A required to plug in to your computer, no additional software or drivers to install.Simple but not cheap, durable high-quality materials, network cable splitter built-in thick environmentally friendly PCB circuit board, aluminum alloy shell, RJ45 eight-core standard jacks, gold-plated pin core, integrated mechanical welding, the transmission of the signal is more stable, the design of the closed insulated module is more convenient, the use of more secure.
【Maximum Transmission Speed 1000Mbps】Using Ethernet Splitter High Speed allows a network connection to be split into two outputs, but with a maximum throughput of 1000 Mbps per cable set (1 and 2), plus there is no crosstalk between the signaling of the two cable sets. It is therefore ideal for situations where large amounts of data need to be transferred quickly and efficiently. Note: This speed figure is the maximum value for the chipset, the actual speed depends on the connected device.
【Ethernet Splitter】This Gigabit Ethernet splitter is designed to solve connection problems caused by insufficient cabling. Powered by the included USB cable, it supports two computers to share an Ethernet line at the same time. It is a simple and efficient network splitter that helps you expand your network ports.
Stable Connection: The RJ45 female connector offers excellent connection and transmission performance by minimizing external signal interference and protecting against internet signal degradation.
Dual RJ45 Socket Conversion: Users can easily convert a single RJ45 connection into two RJ45 sockets, enabling the simultaneous sharing of high-speed DSL, cable modem, and Ethernet ports without needing a router.
Convenient Ethernet Extension Solution: The RJ45 Ethernet adapter cable effectively addresses the issue of managing cables by allowing users to extend their Ethernet connection rather than pulling cables back and forth.
【Run 2 IP Cameras on 1 Cable】: Allows you to run 1 cable run to the switch for 2 cameras that are near each other. Set consists of a "sender" unit and a "receiver" unit. Plug Sender unit into 2 open ports on your POE switch. Run one cable to the location that has the cameras that are nearby each other. Connect 2 short cables to the Receiver unit and connect the other ends to your camera.
【Reduces Cabling Costs】: Lets say you are installing 2 cameras on each side of a corner. Instead of running 2 cables back to the switch, you can now just run 1. Easy and Cost Effective.
【Convenient for Adding Camera】: Ever installed a camera in a location, only to find out that you need another one right by it? Whats worse, the switch is on the other side of the building and it took you hours to run that one cable run. No worries! Just use this splitter set to make your installation much easier as all you need to do now is run 1 cable from the old camera to the new camera.
[Wide Compatibility] RJ45 LAN Ethernet Port Splitter connector extender is compatible with Cat8 Cat7 Cat6 Cat5 Cat5e network ethernet cable and can be compatible with ADSL, hubs, switch, TV, set-top box, router, wireless device, computer, etc.
[Plug & Play]USB cable powered, only 5v1A required to plug in to your computer, no additional software or drivers to install.Simple but not cheap, durable high-quality materials, network cable splitter built-in thick environmentally friendly PCB circuit board, gold-plated pin core, integrated mechanical welding, the transmission of the signal is more stable, the design of the closed insulated module is more convenient, the use of more secure.
[Ethernet splitter 1 to 2 ]Supports two computers using one Ethernet line at the same time,the transmission rate of the two devices can reach up to 1000Mbps, which is a perfect solution to the problem of insufficient network cabling and unstable signal transmission,avoids frequent plugging and unplugging, prolongs the service life of the product（provides a 0.7M 5V type-C charging cable)
Splitter-Design: 1 RJ45-Eingang und 2 RJ45-Buchsenausgänge. Wandeln Sie Ihre Ethernet-Verbindungen von 1 auf 2 Buchsen um und erweitern Sie sie. Wandeln Sie eine einzelne RJ45-Buchse einfach in zwei RJ45-Buchsen um.
Funktion: Entwickelt, um zwei Geräte gleichzeitig im Internet surfen zu lassen
Feature: Einfach zu bedienen, Plug and Play, kein zusätzlicher Treiber erforderlich
Use this network splitter to easily convert an RJ45 connection to two RJ45 sockets. Allows two computers to share high-speed DSL,cable modems and Ethernet ports without the need for a router,extending an RJ 45 socket to two standard 8P8C designs.This is not router,the two device can't surf the Internet at the same time! This is just a splitter
This RJ45 1 to 3 RJ45 Ethernet splitter helps you avoid pulling cables back and forth and avoiding cable breaks.It can also be used as an extension, it is made of high quality materials and has a smooth transmission.It can compatible with ADSL, hubs, switch, TV, set-top box, router, wireless device, computer, Suitable for Cat5, Cat5e, Cat6, Cat7.Please read the product description carefully before purchasing, including the scope of application and precautions.
2mm thick PCB board embedded conductive circuit to avoid damage to the conductor leakage. Ensure a longer service life.Pure copper plated gold needle (eight core): more stable transmission, excellent connection and transmission. The fixed RJ45 female interface shields external electromagnetic signal interference to prevent damage to the Internet signal.Transmission is more stable, it has a superior connection and transmission.The screw hole panel can be fixed to the wall panel.
Discover top deals and categories on AmazonCheck Deals
Curious about how we select the top products for you? Explore How It Works
![ATLAHET Ethernet Splitter 1 in 3 Out High-Speed 1000Mbps Network Splitter [3 Devices Share Network] RJ45 LAN Separator Adapter with USB Power Cord Internet Separator for Cat6/7/8 Cable](https://d1ttb1lnpo2lvz.cloudfront.net/7e0a079/loader.svg)
