Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service levels, popularity trends, and more. The rankings reflect our opinion and should be a good starting point for shopping. By purchasing the products we rank, you’ll get the lowest price we found while we may receive a commission at no cost to you, which will help us continue to provide you with value.
Super Quiet: Equipped with rubber pads and hydraulic bearing, which greatly reduce operating noise and improves efficiency.
RGB Case Fan: Unlimited color transformation, One key to change RGB color.
Perfect Performance: 120mm standad size tuned for high-airflow and large volume cooling.
Curious about how we select the top products for you? Explore How It Works
How do we rank
Our AI-powered platform ranks products using multiple weighted factors from millions of products and user reviews across the web, providing the most valuable and real data. Higher scores rank first.
The fan hub can support up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans or ARGB devices.
Supports 12V RGB/ 5V ARGB motherboard sync, by toggling little switch to achieve syncornize two ligthing system, compatible to AURA, RGB Fusion, Mystic Light, Polychrome. No built-in color modes, sync cable must connect to motherboard header.
Fan speed can be adjusted by PWM signal from motherboard, only the speed of "Fan 1" can be read by the system. The speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM.
Stable SATA Power Input: Simple and stable. Only one SATA connection to the system.
PWM Function: Each port has its own PWM function and the fan speed can be adjusted at the same time. (Only the speed of the red port can be identified by the system.)
10-Port Fan Hub: Supports 10 PWM 4 pin Fans at the same time. Compact design can save space and make the wire more tidy.
【Speed Controllable】fan allows you to freely adjust the computer cooling fan speed according to your needs.This flexibility allows you to adjust fan operation to a level that best suits your environment, whether you require powerful cooling or a quiet work environment。
【Parameter】120(W) x 120(L) x 25(H)mm ( 4.72 x 4.72 x 0.98 inches. ) Rated Voltage: DC 12V | Rated Current: 0.3Amp |Rated Speed: 3000 RPM |Air flow: 80CFM | Noise:41dBA | Connector:DC 5.5x2.1mm Female.
【AC Plug】3V - 12V Control | Input: 100V - 240V 50/60Hz | Output: DC 3-12V 200-2000ma 。
SYNCHRONOUS FAN CONTROL: Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are read out and returned to your system
EXPAND YOUR VENTILATION: Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots
CABLE MANAGEMENT: Case Fan Hub can be placed in housing, it's connected to motherboard with one cable, you can do without many additional cables and lay them freely in the invisible part of housing
Widely Used: This controller is a 5V 3 pin ARGB product to SATA power supply controller, it does not need the motherboard support, directly plug into the power supply SATA interface power supply.
Easy to Use: Simple button design, easy to operate, practical functions, SATA power supply, compact and exquisite, cool lighting mode, extended interface cable design, easy to connect.
Applicable: The ARGB 5C 3pin controller is compatible with all kinds of lighted products with standard general purpose 5V 3pin ARGB interface in the market, such as chassis fans, lamps, air cooled radiators and so on.
STABLE SERIAL ATA POWER INPUT: ARGB Fans Hub Control can Power your fans directly via Serial ATA power, supporting up to 10 fans to prevent stray currents when using the hub. No voltage loss at fan speed, smoother and more efficient operating.
MAGNETIC BACKPLATE DESIGN: The 1 to 10 ARGB PWM Case Fan Hub splitter features a super magnetic design, allowing it to easily attach to metal surfaces of the PC case. This convenient setup eliminates the need for adhesive tape, providing a simple installation solution.
2 IN 1 ARGB AND PWM FAN HUB: This PC RGB Controller hub features dedicated PWM functionality for each port, allowing simultaneous adjustment of fan speeds to enhance cooling performance within your expanded PC case. It supports ARGB fans and strips, synchronizing the lighting effects of devices connected via the 5V 3Pin interface.
Widely Compatible: Chassis fan hub is suitable for 4pin, 3pin and 2pin fans. The total current connected to the fan must not exceed the maximum current value of 13 A to avoid damage to the regulator
Practical Features: Fan splitter controller hub can power to 8 fans and rotate the potentiometer to adjust the speed of up to 8 fans at the same time
Pay Attention: The fan hub supports 2510 2P/3P/4P fan ports, all three fans are regulable speed and can be used with confidence
4. The PWM magnetic fan hub splitter comes with a wireless remote control, offering the flexibility to switch between motherboard and remote control modes. With over 360 built-in lighting effects, users can easily turn lights on/off, adjust fan speed, and modify brightness.
3. The PWM fan hub supports synchronization with major motherboard like compatible with , , , and through 5V 3PIN ARGB connections. This allows for seamless integration of cooler lighting with other ARGB products, enabling customizable lighting effects.
2. With PWM mode enabled on the motherboard, fan speeds automatically adjust based on CPU temperature-speeding up for cooling when temperatures rise and slowing down to conserve energy and reduce noise when cooling is less critical.
Discover top deals and categories on AmazonCheck Deals
Curious about how we select the top products for you? Explore How It Works
