10 Best anycubic printer in Australia

Advertising Disclosure

Last Updated - 26/04/2024

Best Choice
01

ELEGOO

Show more

On Amazon

ELEGOO Saturn 2 MSLA 3D Printer, UV Resin Photocuring Printer with 10-inch 8K Monochrome LCD, 219x123x250mm / 8.62x4.84x9.84 Inch Larger Printing Size
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

【Reliable Printing Performance】The Z-axis is designed with dual linear rails and non-slip hexagon socket leveling screws for ultra-steady & accurate movement and remarkable printing performance. The sandblasted surface build plate provides much stronger adherence, and PFA release liner with easier model removal and less release tension.
【Odor-free Printing Environment】The air filtration system with an activated carbon filter can absorb most of the resin odor, creating an odor-free fresh printing environment. Double heat-conducting copper heat tubes with faster heat transfer and better heat dissipation efficiency prolong the service life of 3D printers.
【Fresnel Collimating Light Source】Fresnel collimating light source consists of 48 highly integrated UV LED lights that work with free-form surface COB lens and FCL system Fresnel lens to emit a uniform light beam of 405nm wavelength with 92% light uniformity, excellent printing accuracy, and a more smooth surface finish.
【43% Larger Printing Volume】With a build volume of 219x123x250mm / 8.62x4.84x9.84 inch and a 10” large mono LCD screen make the prototype size larger and the curing efficiency higher, you can print one larger model or multiple smaller models in a single batch.
【10" 8K Monochrome LCD】ELEGOO Saturn 2 adopts a 10-inch 8K mono LCD screen with an HD resolution of 7680x4320 and an ultra-fine XY resolution of 28.5 microns, outputting outstandingly detailed 3D models with a cure time of only 1-3s per layer. The scratch-resistant tempered glass above the LCD screen with 9H hardness for better light transmission and protection.

A$699.99
02

ELEGOO

Show more

On Amazon

ELEGOO 3D Printer Mars 4 Max, UV Resin Photocuring MSLA Printer with 9.1-inch 6K Monochrome LCD, Double Cooling Fans, Multiple Print Modes, Printing Size of 195.84x122.4x150mm / 7.71x4.81x5.9 Inches
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

Voxeldance Tango Software: It has 3 printing modes: static mode and dynamic mode (including smooth and high-speed mode). In dynamic mode, when the printed model cross-section is small, the print lifting speed is faster to improve printing efficiency; on the contrary, the printing speed will slow down. Combined with ELEGOO self-developed new open-source GOO slicing format, which supports multiple slicing software without restriction.
Refreshing Printing Environment: The plug-in air purifier with a built-in activated carbon filter reduces resin stink for a refreshing printing environment. In addition, ELEGOO's first large-sized air purifier (210x247x410mm) with 95% VOC purification efficiency will be available soon. (Requires separate purchase)
Large Build Volume: The large build volume of 195.84x122.4x150mm (7.71x4.81x5.9 inches) provides you with more creative space to print a large model or print multiple parts in batches, thus increasing your productivity.
Efficient Heat Dissipation: Double fan cooling system design, one for air inlet and the other for air outlet, has faster air circulation and higher heat dissipation efficiency, which extends the service life of 3D printers.
COB+ Refractive Light Source: MARS 4 Max adopts the COB+ refractive light source to ensure that the emitted 405nm wavelength beam is more vertical and uniform on the entire LCD screen after refraction. Paired with the full grayscale anti-aliasing algorithm to make printed models with finer and more realistic details and a smoother surface.
9.1-inch 6K Mono LCD: ELEGOO MARS 4 Max features a 9.1-inch monochrome LCD screen with a resolution of 5760x3600 and an XY resolution of 34um, and printing speed up to 70mm/H. The 9H hardness tempered glass with excellent light transmission protects the LCD screen from scratches.

A$565.00
Best Value
03

LEOWAY
16% Off

Show more

On Amazon

LEOWAY Resin 3D Printer Dustproof Blackout Cover Protection from Sunlight Dust Dirt Spill for SLA 3D Printer Elegoo Saturn, Anycubic Photon Mono X, Phrozen Sonic 4K, Phrozen Sonic Mighty 4K
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

Size L W H: 12 L x 12 W x 18 H in/ 305 x 305 x 458 mm, compatible with Elegoo Saturn, Anycubic Photon Mono X, Phrozen Sonic 4K, Phrozen Sonic Mighty 4K, and other 8.9-inch Resin 3D printers.
Save Your Time: Now you're no longer forced to tidy up your printer right after a printing process. Use 3D printer blackout cover to keep the device secure until you have time for cleaning.
LEOWAY resin 3D printer blackout cover keeps your resin 3D printer free of dust, UV rays, and moisture, protects from damage, and helps contain stray resin fumes. Also can reduce the adverse effects on the printer's work to improve print stability in cold weather.
Durable: Made of soft PVC laminated polyester, built to last. It is waterproof and safe from tears and abrasion while remaining very flexible.
Convenient Design : 3" flaps on all four sides allow easy access to printer controls and ports. Any questions or issues about the product please feel free to contact us.

A$29.99 A$35.99 16% Off
04

YOOPAI

Show more

On Amazon

3D Printer Enclosure for Creality Ender 3/ Ender 3 Pro/Ender 3 V2-Fireproof & Dustproof Tent Constant Temperature Protective Cover for Anycubic Elegoo 3D Printers 25.6” ×21.6” ×29.5”
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

[Noise Reduce] Enclosed build chamber would Effectively Block the noise during printing. Get a slight reduction in the already low noise out put the printer.
[Multifunction Structure] hinged doors on the front of Enclosure. 25.6” ×21.6” ×29.5” Size Compitable with 99% FDM printers,Ender 3, Ender 3 Pro, Ender 3 V2,Ender 3 S1 PRO,Ender 3 S1,Ender 5,Ender 7,Anycubic Kobra, Anycubic Mega Pro.ELEGOO Naptune 3. No glue is required for assembly and can easily disassembled for moving or replacing.
[Flame Retardant] This 3D Printer used aluminum foil inside that resist 600°C ~800 °C to Isolate accidentally fire. aluminum material for more heat retention.
[Easy Installation]5 minutes quick installation. No extra tools required. With Glass fiber Cube and stainless steel corner that features light and strong.
[Constant Temprature] Keep a constant temperature Printing Enviroment. Reducing the Bad impact to 3D prints. improve the prints stability at warm status. Help Regulate the temperature and reduce drafts for improved print quality and keep curious fingers (or paws) off your printer.

A$75.99
05

Sovol

Show more

On Amazon

Sovol Resin Vat 2 Pack Anodized Aluminium with FEP Film and Steel Ring Preinstalled, Metal Frame Resin Tank with Double Silicone Covers Fits for Mars 2 pro ANYCUBIC Photon 3D Printer
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage.
Sovol 3D resin vat fits for ELEGOO Mars/ Mars Pro/ Mars 2/ Mars 2 Pro/ Mars C, Anycubic Photon/ Photon S/ Photon Mono/ Photon Mono Se , QIDI TECH Shadow 5.5 S, and Epax X1. The FEP film and steel ring have been preinstalled. NOTE: Please check if the protective films have been peeled off before installation.
Perfect spare resin vat when you need to change resin color faster and have a better printing experience.
Made of anodized aluminum and durable design for long term usage. Clear and wear-resistance measurements, easier to use and convenient for printing. Notes: Please change the bottom lift speed to 65mm/min or 1mm/s.
2021 New design single steel ring with upgraded FEP film, less effort to drill and install, no difference on function. If you need to replace the FEP film, our new FEP film (pre-drilled) is recommended, or you can also use universal FEP film to drill. You can download the drilling template STL file in the description below and slice & print it.

A$44.99
06

Sovol

Show more

On Amazon

Sovol SV06 3D Printer with All Metal Hotend Planetary Dual Gear Direct Drive Extruder Open Source 25-Point Auto Leveling PEI Build Plate 32 Bit Silent Board Printing Size 220 * 220 * 250mm
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

【Self-developed 32-Bit Silent Board】With TMC2209 drivers, makes the printer works stably and quietly. UART mode is available, so that more modifications can be done easily for advanced users.
【Planetary Dual Gear Direct Drive】Sovol self-developed All Metal Direct Drive Extruder with planetary dual gear set, provide SV06 with higher drive ratio and a lighter motor, helps to achieve more accurate extrusion. Add large external knob for easy feeding.
【PEI Build Plate】The flexible PEI-coated build plate with mesh surface design makes the prints can be removed easily without any tools. 220*220*250mm print size, enough for daily use and household use.
【Comprehensive Warranty】Sovol 3d printers come with one-year warranty and lifetime technical support. If you have any question on Sovol SV06 3d printer, please click "Ask a question" through our storefront's page. We will fast respond within 24 hours and provide you with a satisfactory solution.
【Classic I3 Structure Combines with Sovol New Design】Different from most 3D printers run by wheels in the market, SV06 has a classic I3 structure which avoids wear and tear of wheels and multiple replacements and it is widely applied into industry. We did something new to make it more applicable for household use. Modular design allows you to assemble SV06 within 5 steps easily.
【300℃ High Temp Printing】All metal Hotend Setup makes it possible to print up to 300℃. No need to deal with PTFE replacement anymore, and even no need to flash the firmware, you can print with different materials better and more easily. ( Enclosure is still needed if you want to print over 260℃.)
【25-point Auto Leveling】With inductive sensor, detect the metal print bed through 25 points automatically and compensate the unevenness of the heated bed. The fast, smart, precise detection and compensation help you to get the bed leveled perfectly and get an fantastic first layer.

A$399.99
07

ANYCUBIC

Show more

On Amazon

ANYCUBIC 3D Printer Resin, 405nm High Precision Fast Curing UV Photopolymer Resin for LCD 3D Printing, 1000g Clear
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

STORAGE METHOD: ANYCUBIC Resin recommended to store at 15℃-35℃. The lower the temperature, the higher the resin viscosity. Keep sealed to avoid moisture
MULTI-COLOR: This 405nm 3D resin contains high-quality pigments, which makes the printed works show bright and amazing color effects
HIGH PRECISION: Photosensitive resin has low shrinkage and high precision, 3D resin shrinkage rate of 3.72-4.24%, to ensure the high precision and smooth surface of the model, and perfectly restore the 3D printing works
EFFICIENT AND STABLE: LCD 3D printer resin has high fluidity and fast curing. After curing, it shows good stability in humid and corrosive environment
APPLICATION: UV Resin Suitable for most LCD 3D Printing. Suitable for DIY, jewelry design, classroom teaching and garage kit production, save the cost of your hobby

A$53.95
08

Comgrow

Show more

On Amazon

COMGROW Wash and Cure Station with Large Wash Size 6.9x4.9x6.5in and Cure Size 7.1x7.9in, Washing and Curing Station for ELEGOO Mars Series ANYCUBIC Photon Series LCD/SLA/DLP Resin 3D Printer Models
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

A$128.98
09

Comgrow

Show more

On Amazon

Creality Ender-3 V2 3D Printer, Official Comgrow Upgrade Printers with Silent Motherboard Meanwell Power Supply Carborundum Glass Platform and Resume Printing, 220x220x250mm AU Plug 230V
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

UL Certified Power Supply: Equipped with reliable power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.
Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
Resume Printing Function: Can resume printing from the last recorded extruder position after suffering unexpected power outages, saving your time and reducing waste.
Effortless Filament Feed-in: Ender-3 V2 adds a rotary knob on the extruder, making loading and feeding filament process much easier; Brand new operation UI system and 4.3" smart color screen greatly improve user experience.
Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.

A$299.98
10

ELEGOO

Show more

On Amazon

ELEGOO Mercury Plus 2 in 1 Washing and Curing Station V2.0 for Mars Photon S Photon Mono LCD/DLP/SLA 3D Printed Models, Resin UV Curing Box with Rotary Turntable
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

[Upgrade Protection Function] Sealed washing to prevent the volatilization of alcohol during the cleaning process . Fan-less curing mode makes it quieter to use. The anti-UV lid can block 99.95% of ultraviolet rays to protect your eyes.
[Special Notes] The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.
[Intelligent Curing and Washing] The front TFT screen can directly display the setting time and remaining time, and the operation is simple and intuitive. With built-in 16 pcs of 405nm UV LED and a 360-degree rotating turntable, you can uniformly cure the model.
[Ideal Compatibility] Compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, Photon, Photon s etc, which provides you an ideal support for washing and curing your 3D resin prints.
[Flexible Washing Mode] The models can be placed in a cleaning basket to be cleaned separately, or mount the build plate with models on it and wash them together, which can avoid direct contact with the uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket.
[Curing Size] Maximum curing size: φ140*165mm; Maximum cleaning capacity: 124mm*90mm*110mm (with printing platform), 131mm*90mm*220mm (without printing platform); Machine size: 200mm*200mm*352mm
[Attention] Please read the precautions in the manual that comes with before using the machine. Failure to comply with the precautions may cause dangers to users or damage to machine.

A$169.99